华工正源中文站

  • +86-27-87180102
  • 社交媒体

    微信公众账号

    手机站

  • 英文站
科技引领生活

科技引领生活

查看详情>>
10G 1270nm 15km SFP+ BiDi Transceiver

10G 1270nm 15km SFP+ BiDi Transceiver

MBS-1C41-27 is a high performance, cost effective modules, which is supporting Multi Rate2.125~11.3Gbps, and transmission distance up to 15km.
在线订购
订购信息提交成功!稍后客服人员会第一时间与您联系!
            联系电话:0712-2650028   传 真:0712-2584937
产品模块: 10G 1270nm 15km SFP+ BiDi Transceiver
订购信息:
验证码:
在线留言
在线留言提交成功!稍后客服人员会第一时间与您联系!
            联系电话:0712-2650028   传 真:0712-2584937
类 别: 电子邮箱:
电 话: QQ:
*标题:
*留言内容:
*验证码:
字体显示:

 

Description

MBS-1C41-27 is a high performance, cost effective modules, which is supporting Multi Rate2.125~11.3Gbps, and transmission distance up to 15km.

The transceiver consists of two sections: The BOSA section incorporates a DFB Laser and a PIN-TIA. The PCB section consists of a MCU and an IC which is made up of LD Driver and post amplifier. The module is hot pluggable into the20-pin connector.  The high-speed electrical interface is base on low voltage logic, with nominal100 Ohms differential impedance and AC coupled in the module.

The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Transmit Fault (Tx_Fault) is provided to indicate that the module transmitter has detected a fault condition related to laser operation or safety. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver. A serial EEPROM in the transceiver allows the user to access transceiver monitoring and configuration data via the 2-wire SFP Management Interface. This interface uses a single address, A0h, with a memory map divided into a lower and upper area. Basic digital diagnostic (DD) data is held in the lower area while specific data is held in a series of tables in the high memory area.

Features

l      10Gb/s serial optical interface compliant to 802.3ae 10GBASE-LR, single LC connector for bi-directional application, over 15km SMF

l      Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module “SFP+”

l      1270nm DFB Laser and 1330nm PIN Receiver

l      2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers

l      All-metal housing for superior EMI performance Very low EMI and excellent ESD protection

l      Advanced firmware allow customer system encryption information to be stored in transceiver

l      ROHS compliant

l      Operating case temperature:-40~+85°C

Applications

l      High-speed storage area networks

l      Computer cluster cross-connect

l   Custom high-speed data pipes

Compliance

l      Compliant with IEEE 802.3ae-2002 10G Base-LR

l      Compliant with SFF-8431 & SFF-8083 & SFF-8432 & SFF-8472